Tools

We are fully equipped with just about any tool you will need to see your project come to fruition. From professional grade power tools to hand tools and supplies, MO2H is likely to have what you need.
saw
woodgrain-5
  • Floor Tools

  • Planer
  • Jointer
  • Table Saw
  • Band Saw
  • Lathe
  • Shaper
  • CNC Router
  • Compressed air system shop wide
We offer a wide variety of professional grade tools from our partner, Grizzly Industrial. Learn more about tools specs and see photos by clicking the tabs.

SPECIFICATIONS:

  • Motor: 5 HP
  • Blade tilt: Left, 45 degrees
  • Table height from floor: 35-3/4"
  • Table size with extension 69-1/2"x 78-3/4"
  • Arbor speed: 3600 RPM
  • Arbor size: 1"
  • Maximum dado width: 3/4"
  • Maximum depth of cut @ 90°: 4"
  • Maximum depth cut @ 45°: 2-3/4"
  • Maximum rip capacity: 52"
  • Distance from front of table to blade at maximum blade height: 11-1/2"
  • Distance from front of table to center of blade: 17-1/4"
  • Overall dimensions: 91-1/2" W x 79-1/2" D x 42-1/2"H

FEATURES

  • Precision-ground cast iron table
  • Cast iron trunnions
  • 3/8" x 3/4" T-slots & miter gauge
  • Right hand and rear extension tables
  • Digital readout for bevel angle
  • Quick change between riving knife and splitter guard

SPECIFICATIONS:

  • Motor: 5 HP
  • Throat capacity: 20"
  • Height capacity: 14-1/4"
  • Table size: 29-1/2" x 20-3/4" x 1-7/8" thick
  • Table tilt: 5° left, 45° right
  • Standard blade length: 165"
  • Blade size range: 1/4" - 1-3/8"
  • Blade speed: 4600 FPM
  • Bench Tools

  • Edge Sander
  • Lathe
  • Drill Press
  • Miter Saw
  • Scroll Saw
  • Mortising Machine
  • Oscillating Edge Belt
    and Spindle Sander
  • Belt and Disc Sander
We offer a wide variety of professional grade tools from our partner, Grizzly Industrial. Learn more about tools specs and see photos by clicking the tabs.

SPECIFICATIONS:

  • Motor: 1-1/2 HP
  • Sanding belt size: 6" x 80"
  • Graphite coated platen: 6-3/4" x 29-3/4"
  • 22" x 10-1/2" cast-iron table with miter block
  • Table travel: 6"
  • Table tilts from +60 deg. to –60 deg.
  • Contour sanding table 4-1/4" x 8", adjustable vertically 3-1/2"
  • 1725 RPM motor delivers an 1800 FPM belt speed

SPECIFICATIONS:

  • Motor: 3/4HP
  • Swing over bed: 12"
  • Swing over tool rest base: 9-1/2"
  • Distance between centers: 18"
  • Spindle speeds: Variable
  • Speed range: 650-3800 RPM
  • Tool rest width: 5-7/8"
  • Spindle size: 1" x 8 TPI RH
  • Spindle and tailstock taper: MT #2
  • Three different speed ranges to maximize torque at all available speeds
  • Overall dimensions: 38-3/4" L x 12" D x 17" H

SPECIFICATIONS:

  • Motor: 1/2 HP
  • Spindle travel: 3-1/4"
  • Spindle taper: JT-33
  • Number of speeds: 5 (550–3000 RPM)
  • Column diameter: 2.360"
  • Drill chuck: 1/16"–5/8"
  • Swing: 34"
  • Table: Precision-ground cast iron
  • Table size: 8-5/8" x 9"
  • Table swing: 360 degrees
  • Table tilts: 90 degrees left and 45 degrees right

SPECIFICATIONS:

  • 15 AMP direct drive motor
  • Independent micro fine laser with on/off switch
  • Patented retractable rear guard and triple gear system for increased vertical cutting capacity
  • Cuts 8" crown molding (vertically nested), 6-1/2" baseboard (vertical), and 15" crosscuts at 90°
FEATURES:
  • Motor: 1/5 HP
  • Variable speed (540 to 1885 SPM)
  • Maximum cutting height: 2-1/8" @ 90°, 1" @ 45°
  • Cast iron base
  • Cast iron table tilts from 0° to 45°
  • Throat size: 16"
  • Built in air nozzle to clear sawdust

SPECIFICATIONS:

  • Motor: 1/2 HP
  • Table tilt: 0-45°
  • 5 rubber sanding sleeves (4-1/2" long): 1/2", 3/4", 1", 1-1/2", 2"
  • 4 Sanding drums: 3/4", 1", 1-1/2", 2"
  • Sanding belt speed: 1575 FPM
  • Spindle oscillation: 5/8", 58 oscillations per minute
  • Sanding belt size: 4" x 24"
 
  • Circular Saws
  • Jigsaws
  • Finish Cut Saws
  • Hand Saws
  • Hand Planers
  • Hand Drills
  • Hand Router
  • Finish/Brad Nailers
  • Framing Nailer
  • Staple Guns
  • Soldering Irons

Multitude of
Hand Tools

Woodworking tools rental

Project
Supplies

  • Clamps
  • Blades
  • Standard Drill Bits
  • Measuring Tapes
  • Pencils
  • Movable Carts
  • Aprons
  • Gloves
  • Safety Glasses
For your convenience we also have common project materials available in our Retail space.

My Own 2 Hands is proud to be outfitted with:

– Air Compression System from Rapid Air Systems
– Dust Collection System from Oneida Air Systems
– Air Filtration System from Oneida Air Systems

Come join us and find out what you’ll make with your own 2 hands!